Your cart is empty.



   
 

   

 

Dwyer Series 2000-SP Magnehelic® Differential Pressure Gages

<< Previous in Pressure Next in Pressure >>

Price: From $259.00 to $488.00
Manufacturer: DWYER INSTRUMENTS

Choose Your Model

Ranges:

Options

Options
Green Scale Overlay (-G) Specify Location (Ex. 1.2 to 2.6) (+ $37.50)
Red Scale Overlay (-R) Specify Location (Ex. 1.2 to 4) (+ $41.00)

Series 2000-SP Magnehelic® Differential Pressure Gages

Indicate Positive, Negative or Differential, Accurate within 2%

 

Series 2000-SP Magnehelic® Differential Pressure Gage has a bright red LED on the right of the scale showing when setpoint is reached. Field adjustable from gage face, unit operates on 12-24 VDC. Requires MP or HP style cover and bezel.

 

 

Specifications

Service: Air and non-combustible, compatible gases. (Natural gas option available.)

Wetted Materials: Consult factory.

Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168-hour salt spray corrosion test.

Accuracy: ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).

Pressure Limits: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar).

Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.

Temperature Limits: 20 to 140°F. (-6.67 to 60°C).

Size: 4" (101.6 mm) diameter dial face.

Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.

Process Connections: 1/8" female NPT duplicate high- and low-pressure taps - one pair side and one pair back.

Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).

Standard Accessories: Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)




Click to view Dwyer 2000-SP Series Manual

Click to view Dwyer 2000-SP Catalog Pages