|
PIE 235-Process Voltage Calibrator and pH Calibrator
|
|
Price: From $1,069.00 to $1,159.00
Manufacturer: PIE (Practical Instrument Electronics inc.)
Choose Your Model
| PIE 235 Models: |
|
|
PIE 235 - pH and Voltage Process Calibrator
Voltage Calibrator for all your process voltage signals
- Voltage calibrator sources three ranges of mV & V dc plus percent of 1 to 5 volts With the 235 you can check, calibrate and measure all your voltage, millivolt and pH signal instruments in your plant. Source -500.00 to 999.00 mV, 1.000 to 5.000 V, -25.00 to +125.00% of 1 to 5 V; 0.000 to 20.000 V.
- Power your loops with over 1,000 Ohm loads The 20.000 V range has an extended span of up to 24.000 Volts giving you a portable source for powering your loops.
- Read DC volts The 235 can measure from -500.00 to +999.00 mV, 0.000 to 5.100 V, -25.0 to 125.0 % of 1 to 5 V; 0 to 20.000 V and 0.00 to 60.00 V DC. Use it to check loop power supplies, I/V converters, 1 to 5 Volt signals, and other voltages.
- Save time calibrating recorders and monitors in 4 to 20 mA loops Other brands of calibrators require that you break the loop to calibrate voltage inputs. With the PIE 235 you simply clip the test leads across the voltage inputs in a live 4 to 20 mA loop without disconnecting any wires.
- Simulate pH probes into transmitters & analyzers Use the pH simulator to verify proper operation of pH devices before you place a probe into a calibrated buffer.
- Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable DIAL plus store any three output settings for instant recall with the EZ-CHECK switch. Choose between 2, 3, 5 & 11 steps to automatically increment output in 100%, 50%, 25% or 10% of span plus continuous ramp. Set step/ramp time to 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 & 60 seconds.
- Use in the Plant, Field or Shop
- Simple Battery Changes Separate compartment for no-tool battery changes with four inexpensive “AA” batteries
Advantages of the PIE Model 235 over the Altek 235 voltage calibrator
- Voltage calibrator has wider ranges with greater accuracy
More than twice as accurate with 10 times greater resolution.
- Automatic stepping
- Larger display with backlight
Easy viewing in dark locations
- More Resistant to Accidental Damage
Rubber Boot and Stronger Switches
- Separate Battery Compartment with 4 “AA” Batteries
No more removing housing with screwdriver to replace three expensive 9V batteries. Calibration seals remain intact.
- Simulate a pH probe
Calibrate pH transmitters and analyzers before attaching probe to verify that each is working correctly.
- Includes Certificate of Calibration
All PIE Calibrators come with a free signed and dated certificate. Altek’s come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.
Standard Package: Diagnostic 4-20 mA loop, voltage and pressure calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert.
Basic Package: Diagnostic 4-20 mA loop, voltage and pressure calibrator. Comes with rubber boot and NIST cert.
Downloads & Additional Information
|
Price: From $2,005.00 to $2,095.00
Dual Channel High Accuracy T/C Calibrator with 14 T/C types +mV; milliamp channel includes Patented Current Leakage test. Includes rubber boot, leads, hands free carrying case and FREE NIST Traceable Certificate of Calibration
|
Price: From $2,295.00 to $2,738.00
- Dual Channel Automated RTD & milliamp Calibrator - Source & read 12 RTD Types + 4000Ω; milliamp channel includes Patented Current Leakage test. Includes rubber boot, leads, hands free carrying case and FREE NIST Traceable Certificate of Calibration
|
Price: From $3,387.00 to $3,817.00
High Accuracy Multifunction Diagnostic Calibrator. Sources & reads mA, T/C, RTD, V, mV, and Frequency. Also sources pH, accepts wide range of PIE digital pressure modules and has Patented Current Leakage test. Buy your 820 Elite from instrumentation.com!
|
Price: From $4,283.00 to $5,326.00
The PIE Model 830 is more than a multifunction calibrator. It is also a loop detective that is able to diagnose common problems that other test equipment just can not find. Buy your PIECAL 830 from Instrumentation.com today!
| | |
|
|