• -110°C to +20°C dewpoint Sensor
• Fast, Accurate and Repeatable
• Built-in temperature compensation
• Small & Lightweight
• State-of-the-art electronics & software
• Graphical display
• Advanced User-friendly Interface
• Programmable data logging
|
3" viewport, NEMA 4X/IP67 & Explosion proof Built-in flow regulation, cleanable filter, flow-meter Installation Indoor/Outdoor On-The-Pipe or Panel 4/20 mA sink or source output and RS-422
|
This is a Class One, Div. One, explosion proof sample system with a self-calibration cycle that is user programmable.
|
● -110°C to +20°C dewpoint Sensor
● Fast, Accurate and Repeatable
● Small & Lightweight
● State-of-the-art electronics & software
● 316 Stainless Steel & PTFE wetted parts
● NIST calibrations
● Stainless Steel IP68 housing
● Protection from reverse
|
Unique features: Direct on-the-pipe mounting, swiveling quick connect, rechargeable battery with weatherproof connector, Optional pressure sensor with automatic dewpoint correction, integral demister with 360° view of contaminants and drain valve.
|
: $4,560.00
Price: $4,500.00
The smallest, lightest and most accurate moisture analyzer!
Data logging is a standard feature. +/- 2 deg.C accuracy.
On board menu help, better accessories for removing water, the BEST service for calibration in the business.
|
This automatic condensate drain optimizes performance for ALL portable and fixed point moisture analyzers. It remove slugs of oil or water which slow the performance of the sensor, and in the case of some manufacturers, will actually kill the sensor.
|
Measure humidity in harsh environments with the best-in-class transmitter you can truly depend on. The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT331 is ideal for applications where stable measurement is essential. Temp: -40 to +140
|
Mfr #HMT360 series, Humidity Range 0-100%RH. A versatile series for many industrial and process moisture and temperature transmitter needs.
|
Measurement Range: 0 to 100% RH duct mount; 0 to 95% RH wall mount. This is the low cost, high accuracy standard for transmitting moisture and temperature data for HVAC applications. NIST certs included!
|
HM70 series, 0 to 100%RH. This is the most versatile instrument for hand held measurement and datalogging of %RH, pressure dewpoint, temperature and CO2. Ideal for facilities maintenance!
|
# DM70. Portable, accurate tool to readout and log temperature, dewpoint, %RH, ppmV or ppmW moisture, mixing ratio, absolute humidity, or even CO2 (with separate optional probe. Furnished with NIST traceable cert.
|
Mfr # HMI41, Humidity Range: 0 to 100% RH. If your job is facilities maintenance, this is a great choice for RH/ Temperature measurements in room air, ducts, and anywhere a variety of probes would help. NIST traceable 1% RH accuracy.
|
Compact, portable, and easy-to-use HM40 is designed for spot-checking in a wide variety of environments and is available with four different probe options.
|
Used for the mobile monitoring of the moisture content and temperature in different oils. The simple and intuitive operation via TFT touch screen and built-in data logging function make this the ideal tool for fast and reliable oil analysis.
|
Dirt/moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester.
|
Price: From $346.00 to $355.95
Increases confidence and efficiency in pneumatic calibrations by eliminating unwanted fluid or moisture that contaminate a pressure calibrator or Nitropak.
|
Price: See Options to View Pricing
Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature, moisture, or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away.
|