|
Home > Pressure > Fluke Calibration P3200 Hydraulic Deadweight Testers
Fluke Calibration P3200 Hydraulic Deadweight Testers
|
|
Price: From $15,414.87 to $23,859.76
Choose Your Model
| Piston Options: |
|
| Model: |
|
|
*Please specify local gravity for adjustments of weights.
If unspecified, instruments will be calibrated to Standard Gravity at 980.665 cm/s. Local gravity calculator
If you are looking at deadweight testers we recommend this useful selection guide. It will make it easier to find the right tool for your application.
Fluke Calibration P3200 Hydraulic Deadweight Testers
The P3200 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. These robust instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.
-Pressure ranges to 10,000 psi (700 bar)
-0.015% of reading accuracy standard (0.008% optional)
-Single or dual piston formats
-Built-in hand pumps standard
-Mounted spirit level with adjustable feet
-Units can be trimmed to local gravity FOC
Pressure Ranges
|
| Distilled water operated
|
Ranges to 10,000 psi (700 bar)
|
Accuracy
|
| Accuracy
|
±0.015% of reading (±0.008% optional)
*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
|
Materials of Construction
|
| Standard weight material
|
Series 3 non-magnetic austenitic stainless steel
|
| Weight density
|
7.8 g/cm³
|
| Optional fractional weights
|
Solution heat treated aluminum
|
| Weight density
|
2.7 g/cm³
|
| Piston material
|
Tungsten carbide with nickel binder
Density- 15.0 g/cm³
|
| Cylinder material
|
Hardened martensitic steel
Tungsten carbide (water above 500 psi, 35 bar)
|
| Thermal coefficients of expansion
|
Oil piston/cylinder 16.5 ppm/°C
Water (above 500 psi, 35 bar) 11 ppm/°C
|
General
|
| Test port adaptors
|
1/8, 1/4, 3/8 and 1/2
NPT or BSP
|
| Instrument weight
|
36 lbs (16 kg)
|
| Instrument size
|
(W x D x H) 17.5 in x 12 in x 8.5 in (440 mm x 300 mm x 215 mm)
|
| Mass set weight (typical)
|
80 lbs (36 kg)
|
| Reservoir volume
|
150 cc
|
| Screw press displacement
|
5.5 cc
|
| Pump displacement
|
4.7 cc per stroke
|
| O-ring seal materials
|
Buna N as standard, Viton and EPDM available
|
Weight Increments
|
| Minimum Standard Weight Increments
|
Up to 500 psi (35 bar): 1 psi (0.1 bar)
500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0.1 bar)
|
| Optional Fractional Weights
|
Up to 500 psi (35 bar): 0.1 psi (0.01 bar)
500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar)
|
Operating Fluids
|
| Operating Fluids
|
Distilled or deionized water
|
Options
|
| PressCal Software
|
Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments
|
| Fluids
|
Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory.
|
| Model Name
|
Description
|
| P3211-1
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 1 to 35 bar
|
| P3211-2
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 1 to 35 kgf/cm²
|
| P3211-3
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 10 to 500 psi
|
| P3211-4
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 100 to 3,500 kPa
|
| P3211-5
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 0.1 to 3.5 MPa
|
| P3213-1
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 10 to 350 bar
|
| P3213-2
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 10 to 350 kgf/cm²
|
| P3213-3
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 100 to 5,000 psi
|
| P3213-4
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 1,000 to 35,000 kPa
|
| P3213-5
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 1 to 35 MPa
|
| P3214-1
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 20 to 700 bar
|
| P3214-2
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 20 to 700 kgf/cm²
|
| P3214-3
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 200 to 10,000 psi
|
| P3214-4
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 2,000 to 70,000 kPa
|
| P3214-5
|
Hydraulic Deadweight Tester
Water Operated – Single PCU
Pressure Range 2 to 70 MPa
|
| P3223-1
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 1 to 350 bar
|
| P3223-2
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 1 to 350 kgf/cm²
|
| P3223-3
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 10 to 5,000 psi
|
| P3223-4
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 100 to 35,000 kPa
|
| P3223-5
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 0.1 to 35 MPa
|
| P3224-1
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 1 to 700 bar
|
| P3224-2
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 1 to 700 kgf/cm²
|
| P3224-3
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 10 to 10,000 psi
|
| P3224-4
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 100 to 70,000 kPa
|
| P3224-5
|
Hydraulic Deadweight Tester
Water Operated – Dual PCU
Pressure Range 0.1 to 70 MPa
|
|
For high pressure pneumatic calibrations this unit interfaces with hydraulic deadweight testers providing a rateless liquid-to-gas separation.
|
These liquid-to-liquid separators connect directly to the test port of a hydraulic deadweight tester or comparison test pump.
|
Price: From $13,739.79 to $23,592.16
With features designed to improve accuracy and performance, increase reliability, and simplify operation, the Fluke Pressurements P3000 pneumatic deadweight tester can be used to calibrate virtually any pressure sensing device.
|
Price: From $3,164.07 to $32,635.64
These conversion weights allow the Fluke P3000 Series Deadweight Testers to be used in a pressure unit other than the pressure unit the instrument was ordered for.
|
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar).
|
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used.
|
This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge.
|
Price: From $8,382.00 to $65,561.44
These robust, oil operated instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.
|
Price: From $204.81 to $522.50
|
|
|