|
Current/Voltage
Price: From $981.00 to $1,291.00
The ADT209 and ADT210 allow for measurement of current, voltage and a switch. You can also simulate or source mA or a process transmitter. With a push of a button, you can switch to zero and span values, auto ramp, and auto step throughout the range.
|
Price: From $197.00 to $2,138.00
It's not just a new pressure calibrator or a new pressure recorder. It's a field calibrator that can display recorded data graphically on a high resolution screen. No need to stop a test to analyze data on a PC.
|
The Fluke Calibration 7526A Precision Process Calibrator offers the best balance of economy and accuracy for benchtop calibration of temperature and pressure process instrumentation.
|
With the PIE 901 you can check, calibrate and
measure all your current, voltage and pressure
instruments in a 4 to 20 milliamp DC loop. It can be used
at any access point in your loop. . Pressure modules may be connected via a cable or wirelessly.
|
Measurement of volts, amps, frequency, resistance, diode checking and continuity, the Model 607 offers several unequaled functions including: AC, DC and AC+DC volts, amps and power, True InRush®, power measurements, harmonic analysis, and datalogging.
|
The TRMS Power Clamp-on Meter Model 407 provides a new standard for safety and measurement capability not available in any other clamp meter sold today. Safety Rated at 1000V CAT IV, it is safe to operate in all electrical environments.
|
Price: From $3,795.00 to $7,090.00
Up to 8 measurement channels
Intrinsically safe
Field Switchable Pressure Module
Data logging with Real-time Graphical Trending
Supports Hydrostatic Testing
Color Touchscreen Display
Built-in Barometer
Optional RTD Probes Available
Bluetooth and U
|
• Technician friendly operation
• Calibrate with Confidence
• Source three ranges of mV & V dc plus percent of 1 to 5 volts
• Power your loops with over 1,000 Ohm loads
• Read DC volts
• Simulate pH probes into transmitters & analyzers
|
Price: From $197.00 to $3,944.00
Gauge, absolute, and differential pressure to 15,000 psi / 1000 bar / 100 MPa, dual sensor models, 0.035% of reading accuracy, Advanced simplicity "non-menu" interface, High accuracy thermometer with "true ohm" technology, and BARO option.
|
Price: From $6,648.00 to $10,589.00
The new 914X Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.
|
The ASC-400 is more than just a
signal calibrator. Combined with
our APM external pressure modules
or our dry-block calibrator,
it will calibrate pressure and
temperature, and used together
with JOFRACAL even document
it as well.
| |
|
|