|
Analyzer
• -110°C to +20°C dewpoint Sensor
• Fast, Accurate and Repeatable
• Built-in temperature compensation
• Small & Lightweight
• State-of-the-art electronics & software
• Graphical display
• Advanced User-friendly Interface
• Programmable data logging
|
3" viewport, NEMA 4X/IP67 & Explosion proof Built-in flow regulation, cleanable filter, flow-meter Installation Indoor/Outdoor On-The-Pipe or Panel 4/20 mA sink or source output and RS-422
|
This is a Class One, Div. One, explosion proof sample system with a self-calibration cycle that is user programmable.
|
● -110°C to +20°C dewpoint Sensor
● Fast, Accurate and Repeatable
● Small & Lightweight
● State-of-the-art electronics & software
● 316 Stainless Steel & PTFE wetted parts
● NIST calibrations
● Stainless Steel IP68 housing
● Protection from reverse
|
Unique features: Direct on-the-pipe mounting, swiveling quick connect, rechargeable battery with weatherproof connector, Optional pressure sensor with automatic dewpoint correction, integral demister with 360° view of contaminants and drain valve.
|
: $4,560.00
Price: $4,500.00
The smallest, lightest and most accurate moisture analyzer!
Data logging is a standard feature. +/- 2 deg.C accuracy.
On board menu help, better accessories for removing water, the BEST service for calibration in the business.
|
This automatic condensate drain optimizes performance for ALL portable and fixed point moisture analyzers. It remove slugs of oil or water which slow the performance of the sensor, and in the case of some manufacturers, will actually kill the sensor.
|
Price: From $2,900.00 to $3,750.00
The Model OxyTrans is simple, accurate and an
Economical way to measure traces and % ranges of Oxygen. The unit has a simple display and offers a one point calibration allowing for a quick start up.
|
Price: From $1,595.00 to $1,995.00
The PEL 100 series energy loggers measure and record three True RMS voltage inputs and current inputs, Watts, VARS, VA and Energy (kWh and kVA).
|
Price: From $5,050.00 to $5,750.00
The PowerPad® III Model 8336 is a three-phase power quality analyzer that is easy-to-use, compact and shock resistant.
TRMS voltages up to 1000Vrms AC/DC for two-, three-, four- or five-wire systems
TRMS currents up to 10kArms (sensor dependent)
|
The Model H2S-Tracer is simple, accurate and very economic measurement of Hydrogen Sulfide at ppm levels.
|
Price: From $4,266.67 to $10,611.11
Zircomat InSitu stack gas oxygen analyzers provide cost effective solutions to a wide range of measurement applications in Power, Petro Chemical, Steel, Incineration and Industrial environments worldwide.
|
|
|