|
Home > Calibrators > Ametek Jofra ETC (14 to 752°F) Easy Temperature Calibrator
Ametek Jofra ETC (14 to 752°F) Easy Temperature Calibrator
|
Price: From $2,808.00 to $4,575.00
Manufacturer: AMETEK/JOFRA
Choose Your Model
Models: |
|
Options
Power supply (US deliveries 60 Hz only)
Mains power cable type
Holes for sensor-under-test
Calibration Certificate
|
ETC Easy Temperature Calibrator
The ETC Series is the ideal dry block temperature calibrator when time is the critical factor and the highest accuracy is not a requirement. The block heats up to 100°C per minute and stabilizes in just 3 minutes! The small size and light weight, fit perfectly in a tool box, making it the perfect field calibrator to verify sensors in difficult to reach places
Rugged construction, featuring stainless steel and rubber side panels, make the instrument suitable for many years of service in an industrial environment.
• Temperature range from -10 to 400°C (14 to 752°F) with 3 models
• Accuracy to ± 0.5°C and Stability to ± 0.05°C
• Time saving fast cooling and heating times
• Easy-to-read multi-information display
• Customizable stability checkmark with countdown timer
• Set exact temperature desired to a resolution of 0.1°C
• ETC 400R, small lightweight IR calibrator
• Lightweight and easy to carry
ETC-400 R for infrared thermometers
The ETC-400 R is designed for optimum speed in connection
with calibration of infrared thermometers. The 36 mm
target provides the optimum size for reliable calibration
of infrared thermometers in the process industry as it is
designed for high accuracy and long-term stability while
maintaining speed.
With regard to the coating of the target it has been especially
designed for space technology applications, which
secure long time performance under high temperature
influence. In combination with the shape of the target it
ensures the emissivity of 0.96.
If higher accuracy is required, and for recalibration, a 3
mm external JOFRA STS reference probe can be placed
under the surface of the target.
Super fast heating - ETC-400 A dry-block
The ETC-400 A is designed for optimum speed. The heating
block is built around a highly efficient heating element.
The insertion holes for the temperature device under
test are located around this element. To reduce mass
and increase effectiveness, there is no removable insertion
tube; the holes are drilled directly into the block. The
minimal mass offers an extremely fast heating and cooling
time. The different layouts also make it possible to use an
external JOFRA STS reference probe during the calibration.
Choose the combination of holes that best suits your
needs from our various design combinations.
If your application requires a dry-block that can handle
large sensors or more than one sensor at a time, we offer
several other JOFRA dry-block calibrators that can meet
your needs.
Cooling and heating - ETC-125 A dry-block
The ETC-125 A is a simple yet effective tool for verifying
temperature instruments that also require references
below ambient temperatures: e.g. air-conditioning and
cold counters. The predrilled holes allow the use of an
insertion tube in the largest bore. This increases the flexibility
to match many sensor-under-test sizes.
Shipped with 115VAC Power Supply and US/Canada 115VAC Main Power Cable. Other options available if needed.
JofraCal Software
JofraCal calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermo switches, pressure gauges and pressure switches. It may be used with our well-known temperature calibrators as well as with pressure and multifunction calibrators.
JofraCal calibration software provides an entirely automatic calibration of sensors and a semi-automatic calibration of the complete process loop by means of a PC. The software handles the comparison between the process readout value and the reference value, controls the complete calibration procedure, stores the results, and provides a calibration audit trail through hard-copy certificates. All calibration data are stored for each sensor to monitor drift and optimize recalibration intervals. A scheduler feature allows planning of future calibrations.
• Reduce operator time by automating calibration procedures
• Calibrate up to 24 sensor simultaneously
• Comply with quality systems by documenting results and procedures
• Reduce sources of error by using stored procedures and set-ups
• Use with our temperature, signal, and pressure calibrators
|
|
|