AEMC Waterproof Power & Energy Logger Model PEL 105

AEMC Waterproof Power & Energy Logger Model PEL 105

AEMC’s Model PEL 105 is a simple to use, power and energy data logger that monitors both traditional and renewable energy sources. It monitors and records True RMS voltage and current, power, energy, cost and harmonics locally or from anywhere in the world. The PEL 105 is built into a waterproof case with an IP67 rating designed for outdoor use and is ideal for pole mounting and can be powered from a phase being monitored. This product is perfect for electricians, engineers and contractors doing work in the areas of building and system monitoring and upgrades, including compliance to article 220.87 of the NEC, as well as overall energy audits and incoming power monitoring. It is available with an Android™ App to configure, view and capture data wirelessly. Bluetooth and Wi-Fi wireless communication provides the operator with the ability to work from a safe distance away from dangerous voltages and currents without the need to wear PPE gear.

Product Features:

Built into waterproof case with IP67 rating
Simple to use, single, dual-split and three phase power and energy logger
1000V CAT IV
Measurement of RMS voltages and currents at 128 times per cycle and stored every second
Power Measurements: VA, W and var
Energy Measurements: VAh, Wh (source load) and varh (quadrant indication)
Updated features in DataView software for configuring real-time communication with a PC and report generation with pre-defined or user defined templates
USB, LAN, Ethernet and Bluetooth (Class 1 wireless communication, up to 300 ft. away)
WiFi communication
Minimal programming required
Can be configured from front panel, through Dataview control panel or free app
Satisfies the recommendations of NEC Code 220.87
Provides all the necessary functions for power and energy data logging for 50Hz, 60Hz, 400Hz and DC distribution systems
Automatic recognition of the connected current sensors/probes
Can be powered directly from AC Phase measurement

Applications:

Measure efficiency, find areas for potential savings
Track sub-billing occupants for energy costs
Assign energy costs to departments or operations within a department
Track peak demand periods and find opportunities for surcharge reductions
Determine present capacity and circumvent unnecessary electrical expansion costs
Monitor stray voltages and neutral current
Verify the reliability and operation of electrical machinery
Improve response time to solve power related problems
Track energy availability and reliability of supply
Reduce field service time at sub-stations
Baseline studies for system upgrades in high-rise and office buildings
Remote configurations, monitoring and event loading

Model Description:

Model PEL 105 - Cat. #2137.57 (no sensors): Includes large classic tool bag,5 ft USB cable, five black test leads and alligator clips, power adapter w/ power cord, 12 color-coded ID markers, safety card, 8GB SD-Card installed, USB-SD-Card adapter, 9.6V NiMh battery installed, quick start user guide, and USB stick supplied with DataView® software and user manual.

Model PEL 105 - Cat. #2137.59 (with sensors): Includes large classic tool bag, four 24" AmpFlex® A196-24-BK sensors, 5 ft USB cable, five black test leads and alligator clips, power adapter w/ power cord, 12 color-coded ID markers, safety card, 8GB SD-Card installed, USB-SD-Card adapter, 9.6V NiMh battery installed, quick start user guide, and USB stick supplied with DataView® software and user manual.

Inputs	5 Voltage / 4 Current
Sample Rate	128 per Cycle				6.4kHz at 50Hz	7.68kHz at 60Hz
Specification	Range				Measurement Range	Resolution	Accuracy (Typical)
Volt
Vrms	1000V P to N				10 to 1000V	0.1V	±0.2% Rdg +0.2V
Vrms	1000V E to N				10 to 1000V	0.1V	±0.2% Rdg +0.2V
Urms	1000V P to P				17 to 1000V	0.1V	±0.2% Rdg + 0.4V
Amps @ 50 and 60Hz
Amps (1V nominal) (excluding clamp accuracy	Probe dependent			0.2%< I < 120% Inom		Probe dependent	±0.2% Rdg + 0.02% Inom
AmpFLEX & MiniFlex (including sensor accuracy)	Range 100A Range 400A Range 2kA Range 10kA			200mA to 120A 5 to 440A 50 to 2400A 400A to 12kA		1mA 0.1A 0.1A & 1A 1A	±1.2% Rdg + 50mA ±1.2% Rdg + 0.2A ±1.2% Rdg + 1A ±1.2% Rdg + 5A
Frequency				42.5 to 69Hz		0.01Hz	±0.1Hz
Power
Watts (VA, var) P-Q-S				20W to 20GW / 20var to 10Gvar / 20VA to 10GVA		4 digits min	±0.5% Rdg + 0.005% Pnom
Power Factor (Cos Φ/DPF)				-1 to 1		0.001	±0.05
Energy
kWh (kVAh, kvarh) P-Q-S		Up to 4EWh / 4Evarh / 4 EVAh (E = 1018 )					±0.5% Rdg
Harmonics		DC, 1 to 50
Volts & Amp %				0.01 to 655.0%		0.01%	±1% Rdg from 1 to 25
THD				0.00 to 655.0%		0.01%	±1% Rdg
General Features
Case			Design Rugged field case
Interface			Isolated USB, Bluetooth, and Ethernet, Wi-Fi, SD card for direct transfer to PC. Dataview software for real time data, configuration and reporting included
Memory			8GB SD card (SDHC compliant, FAT32 formatted) 32GB max
Display			LCD with backlight 4.2 x 3.3” (107 x 84mm)
Real-Time Clock			Time and date stamp for Trend mode
Power			Phase to phase or phase to neutral 100 to 1000VAC or external power pack 110V/230V 50/60Hz 15VA; Battery backup when power OFF, 60 minutes typical
Dimensions (L x W x H)			9.65 x 10.6 x 7.1” (245 x 270 x 180mm)
Weight			8.9 lbs (4kg)
Altitude Operating			2000m (6560ft)
Operating Temperature			32° to 108.5°F; (0° to +42.5°C) from 10 to 85% RH
Storage Temperature			-4° to 122°F; (-20° to +50°C) from 0 to 75% RH with battery pack
Electro-Magnetic-Compatibility (EMC)			EN 61326-1 for emission and immunity
IP Rating			IP 67 per IEC 60529
Safety			IEC/EN 61010-1 (1000V CAT IV Pol 4)