Additel 793 Pressure Controller / Generator

Additel 793 Pressure Controller / Generator

The Additel 793 pressure controller combines the latest control / measure technology, modular design and easy to use / maintain features into a single user friendly deice. The Additel 793 provides pressure control up to 15,000 psi (1,000 Bar). For users who require automated production, test, and calibration, Additel has the workload covered with this pressure controller. The ADT793 accepts one ADT151 dual-range pressure module in additional to a barometric pressure module. This allows users to quickly cover a wide range of pressures.

Maximum pressure control range to 15,000 psi (1,000 Bar)
Interchangeable pressure module
Oil and water versions available
Accuracy of 0.02%FS, 0.01%FS or 0.01%RD
Dual-range from -15~3,000 psi (-1~200 Bar ) to 0~15,000 psi (0~1,000) Bar
Control stability 0.005%FS
Ultra-High speed pressure generation and control
No external pressure source required
Control using internal or external pressure modules
Contamination Prevention System (CPS) (ADT793 optional)
LAN, USB, RS232, and Ethernet communication
External reservoir support
Easy maintenance

Note: The ADT793 has two bays for pressure modules. One bay is for a BP module (only) and the other bay is for a CP module (only).

Accessories (included)
Model Number	Quantity
1311000014 - AC power cord (10A 250V)	1 pc
ISO17025 accredited calibration certificate	1 pc
Green terminal plug (For switch detection)	2 pcs
O-ring 3.5*1.5 (For sealing pressure conrol module)	10 pcs
Drain switch valve assembly (Swith valve + 0.5m x 6mm tube)	1 set
Accumulator inflation assembly (Adapter + 1.5m tube for gas inflation), oil media units only	1 set

Application	Picture of Aditel 773's functionality
Quick Change Pressure Modules (30 seconds) Additel's built-in pressure control modules can be installed or replaced within 30 seconds or less. Simply open the upeer edge of the cabin to open. As the door opens, the controller will automatically release pressure, providing the safe removal and installation of the ADT151 modules. Additel offers five different pressure ranges for the ADT793 controller. Select between 1000 bar (15000 psi), 700 bar (10000 psi), 400 bar (6000 psi), 350 bar (5000 psi) or 200 bar (3000 psi) with the variety of accuracies to meet application requriements.
A Singular Pressure Module Design with a Wide Range of Capabilities Additel’s 151 pressure modules have been designed with flexibility and efficiency in mind and can easily be swapped out as needed to meet changing needs and workloads.Higher pressure ADT151 modules cover two separate pressure ranges and come with individual calibrations for each range. This allows for each module to accuracy cover a wide range or pressure workloads. Also, each ADT151 is available in (3) different accuracy levels (0.02% FS, 0.01% FS and 0.01% of reading to meet the demanding needs of our customers. modular configuration provides users with the greatest flexibility.
20% Pressure Step within 30 Seconds In the process of efficient and fast-paced production line testing, verification and calibration, users have strict requirements on the speed of pressure controllers. ADT793 adopts professional control technology to effectively improve control rate and stability: control response time (typical) ≤30 seconds, control stability (typical) ≤±(0.003~0.005)%FS, see specifications for more details.
External Reservoir Support The ADT793 has been designed to support a method of contamination prevention in which the controller only draws in clean fluid during each pressure cycle and purges potentially polluted fluid externally during each cycle to prevent cross contamination between the controller and units under test (UUT’s).
Contamination Prevention System (CPS) Prolongs the Maintenance of the Controller Calibration of DUT’s (devices under test) often introduces contaminates to a calibration system. Contaminates can cause restrictions in valves, lines and filters. Additel has included a turn-key solution with the ADT793 to help reduce these concerns and improve durability and dependability when calibrating customers devices. The use of an automatic fluid exhaust system and integration firmware to allow for purges between pressure cycles to further reduce the possibility of introducing contaminates into the system.