Additel 783 Pressure Controller

Additel 783 Pressure Controller

These modular pressure controllers combine cutting-edge control/measurement technology, modular design, and user-friendly features. The Additel 783 controller series is optimized for high speed to pressure without compromising accuracy and stability. For users who require automated production, test, and calibration, Additel has the workload covered with these pressure controllers. The ADT783 can be quickly outfitted with two controlling modules and one reference barometric module to cover a wide pressure range. The Additel 783 series offers three base units to choose from, which range from 3500 psi (250 bar) down to low pressure differential.

Pressure ranges from -14.35 psi (-0.99 bar) to 3600 psi (250 bar)
Two removable internal pressure modules with multi-range selection (Not Included)
0.02% FS, 0.1% FS, and 0.011% RD accuracies available
Control stability of 0.003%FS
Ultra-High speed pressure control
Absolute and Gauge Pressure
WiFi enabled communications
Large 7" color touch screen display
Optional barometer module
Easy-to-use icon driven interface
I/O alarm

ADT783-D

The ADT783-D is designed for differential and gauge pressure calibration to as low as ±2 inH2O (±5 mbar) up to 36 psi (2.5 bar). Select between one or two pressure control modules. Each module comes with a dual-range calibration, expanding measurement accuracy within each module. This unit has a control stability of 0.003%FS. In addition to the two control modules and optional barometric module can be added which allows for gauge and absolute measurements.

ADT783-1K

The ADT783-1K is designed for gauge pressure calibration from -14.35 (-0.99 bar) up to 1000 psi (70 bar). Select between one or two pressure control modules. Each module comes with a dual-range calibration, expanding measurement accuracy within each module. This unit has a control stability of 0.003%FS. In addition to the two control modules and optional barometric module can be added which allows for gauge and absolute measurements.

ADT783-3.6K

The ADT783-3.6K is designed for gauge pressure calibration from -14.35 (-0.99 bar) up to 3600 psi (250 bar). Select between one or two pressure control modules. Each module comes with a dual-range calibration, expanding measurement accuracy within each module. This unit has a control stability of 0.003%FS. In addition to the two control modules and optional barometric module can be added which allows for gauge and absolute measurements.

Accessories (included)
Model Number	Quantity
1311000014 - AC power cord (10A 250V)	1 pc
ISO17025 accredited calibration certificate	1 pc
Green terminal plug (For switch detection)	2 pcs
O-ring 3.5*1.5 (For sealing pressure conrol module)	10 pcs
Festo plug 6 mm (For sealing)	2 pcs
Festo connector 1/8 BSP male to 6 mm (Base pressure port)	2 pcs
Standard vent assembly (plug with vent valve) (Only for ADT783-1K/3.5K)	1 set

Application	Picture of Aditel 783's Functionality
Flexible Module Design In order to cover the wide range of pressure and simplify the calibration task, the ADT783 can be quickly installed with two controlling modules and one reference barometric module; Each module provides dual range or dual accuracy. Such flexible modular design allows users to configure different modules depending on their cost, pressure range and accuracy requirement. The quick plug-in feature makes the controller’s calibration work become quite easy.
Quick Change Pressure Modules (30 seconds) Additel's 151 pressure control modules can be installed or replaced within 30 seconds or less. Simply open the upper edge of the cabin to open. As the door opens, the controller will automatically release pressure, providing the safe removal and installation of the ADT151 modules.
Convenient Automatic Calibration of Internal Pressure Control Module For production line users, higher frequency calibration and comparison of the pressure control module is an important guarantee means to improve the uncertainty of test calibration. The ADT783 can be connected with a external high-precision pressure module, which can be used to achieve regular comparison of the internal pressure control module, and can also realize the automatic calibration of the internal pressure control module.
Modular Design, Easy Maintenance The ADT783 adopts a variety of easy maintenance design methods, which can quickly change the pressure control module, quickly change the pressure control component, quickly clean the solenoid valve, and fine filtration of pollution particles.
20% Pressure Step Within 10 Seconds In the process of efficient and fast-paced production line testing, verification and calibration, users have strict requirements on the speed of pressure controllers. ADT783 adopts professional control technology to effectively improve control rate and stability: control response time (typical) ≤10 Seconds, control stability (typical) ≤±(0.001~0.003)%FS, See specifications for more details.
Volt Free Contacts Volt Free Contacts enable control of peripheral devices such as vacuum pumps, ovens, etc. Each VFC option has three independent volt-free NO/NC relay contacts. A number of conditions can be set within a Additel instrument to trigger a relay toggling its contacts.