Model PIE 511B

Ten Type RTD Plus Ω Simulator

The PIE 511B simulates RTD resistances into all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. The PIE 511B is a superior replacement for decade boxes, so there is no need to lug a decade box around or be prone to error by reading RTD tables incorrectly. The PIE 511B has better accuracy and functions of many higher priced RTD calibrators.

• Accurate to ±0.25°C (±0.5°F) for Pt 100 Ohm RTD’s with 0.1° Resolution
• Simulates 10 RTD curves with Direct Temperature Output or Ω
• Selectable °C or °F
• Curves included for Platinum 100 and 1000 Ohm, Nickel 110 and 120 Ohmas well as for Copper 10 and 50 Ohm
• Guaranteed to Work with All Pulsed Instruments
• Works with a wide variety of transmitters including popular Rosemount and Honeywell Models
• Compatible with devices using pulsed excitation currents including PLCs, DCS, Recorders, and all others
• EZ-Dial™ Knob with two dialing speeds makes adjusting output easy
• EZ-Check™ switch can store settings for 0% and 100% span adjustments
• Uses standard "AA" Alkaline Batteries
• Superior battery life of 45 hours under typical continuous usage
• Easy access to battery compartment
• Lightweight and Rugged with a Solid Feel
• Small and tough
• Protected to 60V
• Standard Package Includes: RTD source calibrator- 10 type. Comes with test leads and NIST cert.
• Basic Package includes: RTD source calibrator- 10 type. Comes with a NIST cert.

Advantages of the PIE 511B over the Altek 11
	•  Continuously select output temperatures Works will all instrument ranges across the full range in degrees C & F. Not limited to 11 temperature steps! •  Works with Pt 100 & 1000 Ohm, Cu or Ni RTDs One simulator replaces ALL the types and ranges of the Altek 11 •  Instantly select output three temperatures Flip the EZ-Check™ switch to calibrate zero, span and mid-point •  LCD display with backlight Easy viewing in dark locations •  More resistant to accidental damage Reconfigure without resetting calibrator •  Includes Certificate of Calibration All PIECAL Calibrators come with a free signed and dated certificate. Altek's come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.	Altek 11 Discontinued!

---

Don't have Reader?


View the Datasheet. View the Operating Instructions.

---