|
Home > Pressure > Ametek Crystal CalHP Pressure Gauge Calibration System
Ametek Crystal CalHP Pressure Gauge Calibration System
|
|
Price: From $9,871.00 to $15,122.00
Manufacturer: AMETEK/CRYSTAL
Mfr. Part Number: Crystal CalHP
Choose Your Model
| Choose Your Calibration System: |
|
|
Ametek Crystal CalHP Pressure Gauge Calibration System
Calibration lab in a box!
This portable gauge and
transmitter calibration system is 7 to 10 times faster than a dead weight
tester. It allows you to do a 10 point up and down calibration in less than 3
minutes including printing out a calibration certificate.
- Gauge / chart recorder / transmitter calibration system
- 7 to 10 times faster than a dead weight tester
- Reduces transcription / calculation errors
- 0.1% of reading accuracy up to 10000 psi (700
bar) when using the XP2i as the reference or 0.05% of reading accuracy up
to 5000 PSI (300 bar) when using the 30 Series as the reference
- Easy to use and install, wizards guide you through
setup
- Includes a weather-proof rolling case that can be used
as a portable bench
- Weighs just 35 lbs/16 kg
Applications
- Gauge calibration system
- Transmitter calibration system (using the
GaugeCalHP without fluid is ideal for calibrating differential pressure
transmitters)
- Chart recorder calibration system
GaugeCalHP Comparator
Fast, portable, and easy – generate pressure to 15 000 psi
The GaugeCalHP (System G) is a portable, self-contained, hydraulic pressure generator for calibrating pressure gauges, transmitters, sensors, and safety valves. It’s much faster than deadweight testers and most automated pressure controllers; and it’s so quick and easy to use, it’s ideal for calibrating those low cost gauges that are often overlooked for ISO9000 compliance.
• Pressure to 15 000 psi / 1000 bar / 100 MPa
• Vacuum to -12.5 psi / -0.8 bar / -86 kPa
Use without fluid to generate up to 400 “H2O (995 mbar) to within 0.01 inches (0.025 mbar). Makes calibrating differential pressure transmitters easy.
• Easily test large size gauges with the unique pivoting manifold
• Quickly bleed air and capture fluid with the no mess drip tray
• Gauge-safe integral venting system prevents damage to mechanical gauges
• Use with water, light oil, or air
|
FastCalXP Software
Gauge and Transmitter calibration made simple!
FastCalXP software allows you to complete a 10 point up and down calibration in less than 3 minutes including printing out a calibration certificate. FastCalXP frees you from manually recording and interpolating gauge readings, which helps reduce data errors.
FastCalXP provides:
• Convenient storage of all pressure calibration related data in a single database
• Automatic detection of Crystal Engineering digital reference gauges and automatic reading and storage of pressure data
• Easy generation and storage of pressure test profiles
• Flexible templates for certificate generation
• Intuitive user interface for all calibration operations and data management
Software:
|
|
|
|
|
FastCalXP (included)
Calibration software that allows you to do a 10 point up and down calibration in less than 3 minutes.
|
|
|
Crystal USB Driver - Free
Driver for part # 3313 USB-RS232 Adapter.
|
FastCalXP Software is compatible with Windows VISTA (7,8 & 10), and Windows 7. Requires Excel (or Office) 2003 SP3 or higher to print calibration certificates.
Options
|
CrystalCalHP-NPT
|
Includes the following items:
|
GaugeCalHP
|
Pressure comparator (up to 15
000 psi)
|
|
5103
|
Rebuild kit
|
|
5102
|
Fine Adjust kit (installed)
|
|
MPF15K-1/4FPT
|
1/4" NPT Female (2)
|
|
MPF-1/8QTF
|
1/8" NPT Quick Test
|
|
MPF-1/4QTF
|
1/4" NPT Quick Test
|
|
MPF-1/2QTF
|
1/2" NPT Quick Test
|
|
|
|
|
|
|
|
|
|
|
FastCalXP
|
USB License Key,
CD and manual
|
|
MPF-CAP
|
Cap for CPF Male (2)
|
|
5354
|
USB Footswitch for FastCalXP
|
|
3313
|
USB to RS232 DB9M Adapter
|
|
5101
|
Weather-proof, hard carrying
case with rolling wheels (includes strap and bottle)
|
|
|
CrystalCalHP-NPT-PSI
|
Includes the following items:
|
GaugeCalHP
|
Pressure comparator (up to 15
000 psi)
|
|
15KPSIXP2i
|
15 000 psi test gauge
|
|
5KPSIXP2i
|
5000 psi test gauge
|
|
1KPSIXP2i
|
1000 psi test gauge
|
|
5103
|
Rebuild kit
|
|
5102
|
Fine Adjust kit (installed)
|
|
MPF15K-1/4FPT
|
1/4" NPT Female (2)
|
|
MPF-1/8QTF
|
1/8" NPT Quick Test
|
|
MPF-1/4QTF
|
1/4" NPT Quick Test
|
|
MPF-1/2QTF
|
1/2" NPT Quick Test
|
|
|
|
|
|
|
|
FastCalXP
|
USB License Key,
CD and manual
|
|
MPF-CAP
|
Cap for CPF Male (2)
|
|
5354
|
USB Footswitch for FastCalXP
|
|
3313
|
USB to RS232 DB9M Adapter
|
|
5101
|
Weather-proof, hard carrying
case with rolling wheels (includes strap and bottle)
|
|
 Download the Manual
Get the Data Sheet
Get the Brochure
Get the Software
Get the USB Driver
FastCalXP Manual
|
Fast, portable, easy - generate pressure up to 15 000 psi
The GaugeCalHP is a portable, self contained, hydraulic pressure generator for calibrating pressure gauges, transmitters, sensors, and safety valves.
|
FastCalXP software allows you to complete a 10 point up and down calibration in less than 3 minutes including printing out a calibration certificate. Compatible with nVision, XP2i, and 30 Series.
|
MPF-MPFTU; 10,000PSI; Finger tight to 10K psi; Interchangeable with HIP and Autoclave; Safety weep hole; Suitable for hydraulic and pneumatic. The safest fitting on the market!
|
Mfr #MPF-MPF, 10,000psi; Finger tight to 10K; Interchangeable with HIP and Autoclave; Safety weep hole; Suitable for hydraulic and pneumatic applications. Stainless steel, 4 X over pressure rated. The safest fitting available!
|
Price: From $266.00 to $2,621.00
Always Seals, Always Safe, Leak-Free up to 10000 PSI/700 bar/70 MPa, Purpose-designed for testing & calibration, Self-venting weep hole assures a safe disconnection from a pressurized system.
|
Price: From $446.00 to $734.00
Mfr # MPH series, 10,000 PSI
Finger tight to 10K PSI/ 700 bar/ 70MPa; Interchangeable with HIP and Autoclave Engineers; Safety weep hole, Suitable for Hydraulic and pneumatic applications
|
Price: From $147.00 to $266.00
10,000psi; Finger tight to 10k; Interchangeable with HIP and Autoclave; Safety weep hole; Suitable for hydraulic and pneumatic applications. Connect your Crystal fitting to Ralston Quick Connect. 4 X overpressure, the safest fittings you can buy!
|
MPM-MPM, 10,000PSI; Finger tight to 10K; Interchangeable with HIP and Autoclave Engineers; Safety weep hole alerts of any leaks; Suitable for hydraulic and pneumatic applications. 4 x Safety factor. The safest fitting on the market!
|
#MPF-1/8,1/4,1/2 MPT Connect your nVision to a GaugeCalXP, 10,000PSI; Finger tight to 10K, Interchangeable with HIP and Autoclave Engineers; Safety weep hole, Suitable for hydraulic and pneumatic applications. 4 X overpressure. The safest fitting!
|
MPF series; Finger tight to 10K PSI; Interchangeable with HIP and Autoclave engineers; Safety weep hole; Suitable for hydraulic and pneumatic applications. Connects to FNPT. 4 X overpressure. The safest fitting on the market!
|
MPF-AN4M; 5,000psi; Finger tight to 10K; Interchangeable with HIP and Autoclave; Safety weep hole; Suitable hydraulic and pneumatic. 4 x overpressure capability. The safest fitting on the market!
|
MPM-PLUG; Finger tight to 10Kpsi, Interchangeable with HIP and Autoclave; Safety weep hole; Suitable for hydraulic and pneumatic applications; Plug any MPF fitting. 4 X overpressure, the Safest fitting on the market!
|
Mfr # MPF series, 10,000PSI; Finger tight to 10K; Interchangeable with HIP and Autoclave Engineers; Safety weep hole; Suitable for hydraulic and pneumatic applications. The safest fitting on the market!
|
# MPF-MPFBULK; works with Swagelok Bulkhead; finger tight to 10K psi; Safety weep hole, Interchangeable with HIP and Autoclave; Suitable for hydraulic and pneumatic applications. 4 X overpressure rated. The safest fitting on the market!
|
# MPF series,Finger tight to 10k; Interchangeable with HIP and Autoclave; Safety weep hole; Suitable for hydraulic and pneumatic applications. 4 X overpressure, the safest fitting on the market!
|
MPF-1/8MPT90, 10,000psi; Finger tight to 10K; Interchangeable with HIP and Autoclave; Safety weep hole. Suitable for hydraulic and pneumatic applications. Stainless steel, 4 X over pressure rated. The safest fitting available!
|
Price: From $147.00 to $176.00
#MPF-1/8,1/4,1/2 MPT Connect your nVision to a GaugeCalXP, 10,000PSI; Finger tight to 10K, Interchangeable with HIP and Autoclave Engineers; Safety weep hole, Suitable for hydraulic and pneumatic applications. 4 X overpressure.
|
# MPF-CAP 10,000psi; Finger tight to 10K; Interchangeable with HIP and Autoclave; Safety weep hole; Suitable for hydraulic and pneumatic applications. Stainless steel, 4 X over pressure rated. The safest fitting for calibration use.
|
Always Seals, Always Safe, Leak-Free up to 10000 PSI/700 bar/70 MPa, Purpose-designed for testing & calibration, Self-venting weep hole assures a safe disconnection from a pressurized system.
|
Mfr# MPF series ~ For Foxboro, Rosemount, Yokogowa & Honeywell transmitters, Finger tight to 5,000PSI; Interchangeable with HIP and Autoclave; Safety weep hole; Suitable for hydraulic and pneumatic applications. 4 X overpressure.
|
# MPF series, 10,000PSI; Finger tight to 10K; Interchangeable with HIP and Autoclave Engineers; Safety weep hole; Suitable for hydraulic and pneumatic applications. 4 X overpressure rated. The safest fitting on the market!
|
|
|