|
Home > Pressure > Additel ADT 761-D Automated Pressure Calibrator
Additel ADT 761-D Automated Pressure Calibrator
|
Choose Your Model
Pressure Range: |
|
Options
* denotes required field
1/8" FNPT Port Connection Manifold Options
Optional Pressure Manifold
|
Additel ADT 761-D-N Automated Pressure Calibrator
With a built-in high performance electronic pump and precision pressure controller, the 761 series portable automated pressure calibrators provide a turn-key solution for calibration of gauges, transmitters, and switches both in the field and in the laboratory. In a portable package, this calibrator can automatically generate pressures from 95% vacuum to 15 psi (1 bar) with 0.02% FS accuracy. To improve the calibrator accuracy, two pressure modules with differing ranges are built-in and integrated with the internal pump and controller. The 761-D is specially designed for low pressure calibration, and pressures as low as 0.01 Pa (0.00004 inH2O) can be automatically generated and controlled. With optional external pressure modules (160 series), the 761 can measure pressures up to 10,000 psi (700 bar) with 0.025%FS accuracy. In addition to the pressure generation, control, and measurement capabilities, the 761 also features HART communication capability, supplies 24V loop power, and reads the current or voltage produced by the pressure transducers. The 761 is a state of the art automated pressure calibrator which brings automated pressure calibration to the field.
• Fully automated pressure calibrator with built-in pressure generator / controller to as high as 15 psi (1 bar) or as low as 0.01 Pa (0.00004 inH2O)
• 0.02%FS/ 0.05%FS accuracy
• Dual pressure modules
• Built-in filter and liquid trap with venting system prevents contamination of the calibrator
• Portable (12.4 lb)
• Pressure Range
Pressure generated by built-in pump and controlled automatically from 90% vacuum to 15 psi (40 bar)
Pressure measured with external pressure modules (160 series) to 10,000 psi (700 bar)
Accuracy (Fully temperature compensated)
0.02%FS
0.05%FS (ADT761-LLP)
• Control Stability
<0.005%FS
ADT761-LLP: < 0.05 Pa (0.0002 inH2O)
• Contamination prevention system
Built-in filter and liquid trap with venting system prevent contamination of the calibrator
Solid particles can be blocked by built-in filter
A small amount of Liquid can be collected by the built-in liquid trap
Both solid particles and liquid can be blown out through the venting system
• Automation and Test Program
Fully Automated pressure calibration
Task preset and auto run
Auto step
• Easy to Use
User friendly interface
Intuitive icon driven menu structure
• Sourcing and Measuring electrical signals
Measure mA or V with 0.01% RD + 0.005%FS accuracy
Source/sink 0 to 22mA current
24 VDC loop power supplied to pressure transmitter during test
Automated switch test
• Misuse Protection
Up to 30V misuse protection on any two sockets
• Display
7" LCD color screen (800X480)
• Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results
• HART Communication capability
Support HART instrumentation
• Rechargeable battery:
Rechargeable battery with up to 8 hours operation between charges
• Leak testing:
Apply leak test to an external pressure system to determine the magnitude of pressure variations due to leaks
• Pipeline Protection:
Special design the pipeline layout to avoid possible blockage and leakage
• Portable:
Only 12.4 lb
• Multi Lingual Interface
English, German, French, Italian, Spanish, Portuguese, Simplified Chinese
(Traditional Chinese, Japanese and Russian are available per request)
• NIST Traceable:
NIST traceable calibration with data (included)



• Control Stability
<0.005%FS;
ADT761-LLP: < 0.05 Pa (0.0002 inH2O)
• Pressure Connections
G1/8 Female on calibrator
Two 1/4NPT(or 1/2NPT, 1/4BSP, M20×1.5) female hand-tight connectors on the external pressure manifold (included)
• External Pressure Module Connection
External pressure module connector
• Electrical Connection
0.156 inch (Ø4mm) banana sockets
• Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results
• Display
7" LCD color screen (800×480)
Display rate: 5 readings per second
• Pressure Units
Pa, kPa, MPa, psi, bar, mbar, inH2O 4°C, mmH2O 4°C, inH2O 20°C, mmH2O 20°C, inHg 0°C, mmHg 0°C, kgf/cm2
• Power
Battery: Rechargeable Li-ion Polymer battery (included)
Li-Battery working time: ~8 hours
Recharge time: ~3 hours
External Power: 110/220V Power adapter (DC 27 V) (Included)
• Environmental Specification:
Operating temperature: 32°F to 122°F (0°C to 50°C)
Compensated Temperature: 32°F to 122°F (0°C to 50°C)
Storage temperature: -20°C to 60°C
Humidity: <90%, non-condensing
• European Compliance:
CE Marked
• Communication
RS232 (DB9/F, environmentally sealed)
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data length: 7 Bits, 8 Bits
Stop bit: 1 Bit, 2 Bits
Address: from 1 to 121
• Dimension
11.65" X 7.32" X 7.09"(296mm X186mm X180mm)
• Weight:
12.4 lb (5.6 kg)
• Warranty:
18 months • Pressure Range

* One year accuracy (including yearly stability) except ADT761-LLP which is 0.05%FS calibration accuracy and 0.05%FS yearly stability.
* * Additel 761 calibrators support 160 series intelligent digital pressure modules that are available for gauge, vacuum and absolute pressure from -15 psi to 10,000 psi (-1 bar to 700 bar). Accuracy from 0.025%FS includes operation over 14°F to 122°F (-10°C to 50°C), one year stability and calibration uncertainty. For detailed specification refer to 160 series pressure modules datasheet.
• Electrical Measurement and Source Accuracy


Additel 160A
Intelligent Digital Pressure modules
(See Related Products below)
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the Additel 160 series Intelligent Digital Pressure Module (IDPM) provides an accurate, reliable, and economic solution for wide range of pressure applications. It is loaded with functionality and remarkably easy to use. In order to reach the best performance, every silicon pressure sensor in the module has been specially aged, tested and screened before assembly. Designed external pressure module for Additel 760 automatic handheld pressure calibrator, Additel 761 automated pressure calibrator and Additel 222A, Additel 223A and Additel 761 calibrators, the Additel 160 IDPM is unmatched in performance and reliability.
Don't have Reader?
View the Data/Spec Sheet.
View the Manual.
Get the Software.
|
Price: From $12,638.00 to $17,993.00
With a built-in high performance electronic pump and precision pressure controller, the 761 series portable automated pressure calibrators provide a turn-key solution for calibration of gauges, transmitters, and switches.
|
With a built-in high performance electronic pump and precision pressure controller, the 761 series portable automated pressure calibrators provide a turn-key solution for calibration of gauges, transmitters, and switches.
|
Price: From $11,914.00 to $17,430.00
With a built-in high performance electronic pump and precision pressure controller, the 761 series portable automated pressure calibrators provide a turn-key solution for calibration of gauges, transmitters, and switches.
|
Price: See Individual Prices
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the Additel 160A series Intelligent Digital Pressure Module (IDPM) provides an accurate, reliable, and economic solution for wide range of pressure applications.
| | |
|
|