Your cart is empty.



   
 

   

 

Fluke/Hart 6102/7103 Micro-Bath Thermometer Calibrators

<< Previous in Calibrators Next in Calibrators >>

Price: From $7,355.00 to $11,340.00
Manufacturer: FLUKE/HART SCIENTIFIC
Mfr. Part Number: 6102/7102/7103

Choose Your Model

Model:
Fluke/Hart 6102/7103 Micro-Bath Thermometer Calibrators

Need portability and extreme stability? Hart Micro-Baths have both. We invented the Micro-Bath. And, while many have tried to duplicate it, none of them use proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. The 6102 weighs less than 4.5 kg (10 lb.), with the fluid. It’s lighter and smaller than most dry-wells, has a spill-proof lid, and is easier to carry than your lunch. You can take it where you need to go without carts or excessive effort. Micro-Baths can even be transported with the fluid in them.

Wherever you go with your Micro-Bath, you can count on its performance. Each model is stable to ±0.03 °C or better, depending on the fluid you use. Uniformity is ±0.02 °C or better for low uncertainties using a reference thermometer. Display accuracy has been improved to ±0.25 °C for quick calibrations without a reference thermometer. In short, you get the stability and precision of a liquid bath in a dry-well-sized package. Don’t be fooled by competitors who pour oil into a dry-well and call it a bath. Hart Micro-Baths are maximized for true fluid-bath performance.

With a 48 mm (1.9-inch) diameter, 140 mm (5.5-inch) deep tank, a Micro-Bath can calibrate any type of sensor including short, square, or odd-shaped sensors. The problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator. Micro-Baths are perfect for liquid-in-glass and bimetal thermometers.

The 6102 has a temperature range from 35 °C to 200 °C, and the 7103 extends from –30 °C to 125 °C. Stability, uniformity, and accuracy specifications cover the entire range for each bath, not just the best temperature.

All Micro-Baths have RS-232 ports, come with our Interface-it software, and can be used with Hart’s MET/TEMP II software (described on page 81). Also included are contacts to calibrate a thermal switch, eight set-point memory storage, ramp-rate adjust, and over-temperature safety cutout.

You may have noticed we haven’t touted our CFC-free refrigeration. Yes, cold Micro-Baths are CFC-free, and also compressor-free. That’s right—no heavy, noisy compressor to lug around. We achieve our temperature range and stability with only one moving part. This means more durability and less weight.

Hart manufactures and sells temperature calibration baths of every size and shape, and now we have the smallest and lightest baths in the industry to go with the dozens of other models we make.

Look at the specs, price, and value of these portable instruments and you’ll know why Hart Scientific is the number-one company in this business.

Features

    * World’s smallest portable calibration baths
    * Calibrates sensors of any size or shape
    * Stability to ±0.015 °C
    * Ranges from –30 °C to 200 °C

Ordering Information

6102 - Micro-Bath, 35 °C to 200 °C
(includes a transport seal lid and a 2082-M test lid)

7103 - Micro-Bath, –30 °C to 125 °C (includes a transport seal lid and a 2085 test lid)

Specifications


6102
7103
Range 35°C to 200°C
(95°F to 392°F)


–30°C to 125°C
(–22°F to 257°F)
Accuracy ±0.25°C
Stability ±0.02°C at 100°C
±0.03°C at 200°C

±0.03°C at –25°C
±0.05°C at 125°C
Uniformity ±0.02°C
Resolution 0.01°C/F
Operating Temperature 5°C to 45°C
Heating Time 25°C to 200°C: 40 minutes 25°C to 100°C: 35 minutes
Cooling Time 200°C to 100°C: 35 minutes 25°C to –20°C: 45 minutes
Well Size 1.9” dia. x 5.5” deep (48 x 139 mm)
Size 5.5" W x 10.38" H x 8" D
(14 x 26 x 20 cm)
9" W x 13.2" H x 10.5" D
(23 x 34 x 26 cm)
Weight 10 lb. (4.5 kg) with fluid 22 lb. (9.8 kg) with fluid
Volume 0.75 L (1.6 pints) 1.0 L (2.11 pints)
Power 115 VAC (±10%), 2.3 A or 230 VAC (±10%),
1.1 A, switchable, 50/60 Hz, 270W

94–234 VAC (±10%), 50/60 Hz, 400 W
Computer Interface RS-232 included with free Interface-it software
NIST-Traceable Calibration Data at 50°C, 100°C, 150°C, 200°C
Data at –25°C, 0°C, 25°C, 50°C, 75°C, 100°C, 125°C


View the Data/Spec Sheet for all three models. Don't have Reader?
View the Manual for Model 6102.  

View the Manual for Model 7103.  
View more about Bath Fluids.  


Related Products

Fluke/Hart 2083 - Tank Extender, 6102/7102 Micro-Bath
Price: Call for pricing
Fluke/Hart 2083 - Tank Extender, 6102/7102 Micro-Bath
Tank Extender, 6102/7102 Micro-Bath. Allows the user to insert probes up to 9" long. Screws into place, easily added or removed.
unavailable
Fluke/Hart 2085 - Lid, Plastic Blank 7103 Micro-Bath
Price: Call for pricing
Fluke/Hart 2085 - Lid, Plastic Blank 7103 Micro-Bath
Lid, Plastic Blank, for 7103 Micro-Bath
unavailable
Fluke/Hart 9317 - Case, 7103 Micro-Bath Carrying
Price: $1,475.00
Fluke/Hart 9317 - Case, 7103 Micro-Bath Carrying
Case, 7103 Micro-Bath Carrying Case. Padded, with compartments suitable for the model 7103 bath
unavailable
Fluke/Hart 9310 - Case, 6102 Micro-Bath Carrying
Price: $1,305.00
Fluke/Hart 9310 - Case, 6102 Micro-Bath Carrying
Case, 6102 Micro-Bath Carrying Case. Padded, with compartments suitable for the model 6102 bath
unavailable
Fluke/Hart 3320 - Stir Bar, Magnetic 5/16" Dia X 2.00
Price: $75.00
Fluke/Hart 3320 - Stir Bar, Magnetic 5/16" Dia X 2.00
Stir Bar, Magnetic 5/16" Dia X 2.00
unavailable
Fluke/Hart 5010-1L - Fluid, Silicone Oil 200.05, 1 L (0.26 US Gal)
Price: $230.00
Fluke/Hart 5010-1L - Fluid, Silicone Oil 200.05, 1 L (0.26 US Gal)
Fluid, Silicone Oil 200.05, 1 L (0.26 US Gal) Usable Range: -40 C to + 130 C Flashpoint: 133°C Best for model 5010 bath
unavailable
Fluke/Hart 5013-1L - Fluid, Silicone Oil 200.20, 1 L (0.26 US Gal)
Price: $215.00
Fluke/Hart 5013-1L - Fluid, Silicone Oil 200.20, 1 L (0.26 US Gal)
Fluid, Silicone Oil 200.20, 1 L (0.26 US Gal) Usable Range: 10°C to 230°C Flashpoint: 232°C Best suited for model 5013 bath.
Fluke/Hart 2082-M - Lid, Metal Blank, 6102
Price: Call for pricing
Fluke/Hart 2082-M - Lid, Metal Blank, 6102
Lid, Metal Blank, for model 6102 micro-bath.
unavailable
Fluke/Hart 2082-P - Lid, Plastic Blank, 7102
Price: Call for pricing
Fluke/Hart 2082-P - Lid, Plastic Blank, 7102
Lid, Plastic Blank, for model 7102 micro-bath.