Start & Stop, Digitial Display, Temperature & Humidity Data Logger
Record only the data you want to!
Our new Start & Stop feature allows you to quickly start or stop logging at any time allowing you to eliminate unnecessary data.
Start and Stop multiple times before downloading to DicksonWare.
Eash logging sessions is easily identified on the graph and table.
Digital Display Makes it Easy! - lets you keep track of temperature and humidity conditions in between data downloads.
Added User-friendly features-
-
Start/Stop Recording: lets you Start & Stop logging repeatedly without having to take the logger back to your PC
-
Display current Temperature & Humidity or current min/max readings
-
User replaceable battery
-
USB enabled triple speed data downloading
Temperature Range: -4 to 158F
Humidity Range: 0 - 95% RH
Temperature Accuracy:±0.8F (±0.5C) over range +20 to +120F (-6 to +48C),±1.8F (±1.0C) < +20F (-6C) and > +120F (+48C)
Temperature Sensor: Internal digital thermometer sensor
Humidity Sensor: Monolithis RH IC sensor
Ambient Operating Conditions: -4 to 158F; 0 to 95% RH (non-condensing)
Data Capacity: 32000
Power Source: 123A Lithium; user replaceable
User Calibration w/ SW400: Yes
DicksonWare™ Software Minimum Requirements: 13.6
Software Required: A016 - DicksonWare™ Software USB Download Cable or A026
DicksonWare™ Software PC Requirement: Microsoft Windows 98 or Higher, PC w/ 486 MHz or faster microprocessor, 16MB RAM, 1 free USB root hub, CD drive and VGA Monitor or better
DicksonWare™ Cable Type/Length: USB male series "A" plug to 5 in male series "B" mini plug, 6ft (2 meters)
DicksonWare™ Computer Interface: USB