Your cart is empty.



   
 

   

 

RKI Beacon 110 Single Channel Wall Mount Controller

<< Previous in Controller Next in Controller >>
Beacon 110 Single Channel Wall Mount Controller
Beacon 110 Single Channel Wall Mount ControllerRKI GAS DETECTION
Price: From $895.00 to $1,060.00
Manufacturer: RKI GAS DETECTION

Choose Your Model

Single Channel Controller Selection:

Options

Battery Back-up Assembly Selection

Beacon 110 Single Channel Wall Mount Controller

Gas detection should not be complicated. The RKI Beacon 110 Single Channel Wall Mount Controller is gas detection simplified.

The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry’s best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. The Beacon 110 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller.

The 10 amp rated relays are strong enough to directly power external alarms and horns. The digital display has backlighting and simultaneous readout of the gas type and concentration.

The RKI Beacon 110 Single Channel Wall Mount Controller is also housed in a NEMA 4X rated case for a weather tight seal. This case design complies with lock out / tag out standards and can be fully secured. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 ships complete with a wall mounting kit for easy installation.

RKI offers the industry’s widest selection of standard and toxic gas detection sensors (See Related Products for Sensor Options), which can be utilized with the Beacon 110, providing gas monitoring protection for almost any application.


Please contact us if you would like assistance with pricing or configuring a system quotation.


See Related Products Below to View Detector Assemblies (Sensor Options).


Features

  • Low cost versatile solution
  • Compact, weatherproof, NEMA 4X enclosure
  • 115/220 VAC or 24 VDC operation
  • Long life sensors (2+ years typical)
  • Accepts RKI LEL/O2/H2S/CO direct connect sensors
  • Accepts any 4-20 mA transmitter
  • Audible alarm with reset button
  • Two programmable alarm levels
  • Built-in trouble alarm with relay
  • Relay rating 10 amps, form C
  • Provides 4-20 mA output

Application

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment pants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel
  • Automotive
  • HVAC




Related Products

RKI 35-3001 Series Sample Draw Sensor / Transmitter
Price: See Options to View Pricing
RKI 35-3001 Series Sample Draw Sensor / Transmitter
The 35-3001 series is a compact sample draw detector assembly with a built-in pump that is powered from 24VDC. This unit features a NEMA 4X enclosure, making it dust, water and corrosion resistant. It also features a low flow alarm.
RKI M2A Stand Alone Explosion Proof Transmitter
RKI M2A Stand Alone Explosion Proof Transmitter
Price: See Options to View Pricing
RKI M2A Stand Alone Explosion Proof Transmitter
RKI M2A Stand Alone Explosion Proof Transmitter is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PL
RKI M-Series CO/H2S transmitter
Price: $295.00
RKI M-Series CO/H2S transmitter
The RKI low cost CO/H2S transmitter is a highly reliable and very cost effective basic 4-20 mA transmitter for the detection of carbon monoxide and hydrogen sulfide. The electronics are protected inside a plastic enclosure to avoid damage.
RKI Single or Dual Sensor System Air Aspirator
Price: See Options to View Pricing
RKI Single or Dual Sensor System Air Aspirator
Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature, moisture, or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away.
RKI S2 series gas sensor/transmitters
RKI S2 series gas sensor/transmitters
Price: See Options to View Pricing
RKI S2 series gas sensor/transmitters
RKI S2 series gas sensor/transmitters are highly reliable and very cost effective for the detection of common gas hazards. The S2 series are available for LEL, H2 Specific (LEL, and ppm), Oxygen, H2S, CO, and for a variety of toxic gases
RKI Direct Connect gas sensors
RKI Direct Connect Gas Sensors
Price: See Options to View Pricing
RKI Direct Connect Gas Sensors
Available gases include LEL, H2S, CO, & CO2 Toxic sensors include NH3, AsH3, HCN, PH3, and SO2 Infrared sensor for combustibles and CO2 Patented water repellent sensor coating Explosion proof construction Optional stainless steel junction box
RKI GD-K88Ai diffusion sensor/gas detection transmitter
Price: $1,250.00
RKI GD-K88Ai diffusion sensor/gas detection transmitter
The GD-K88Ai is a diffusion style toxic gas detection transmitter ideally suited to meet a variety of toxic gas detection needs. You can choose from a wide range of electrochemical toxic gas sensors to install in this model.
RKI GD-70D Intelligent Gas Detector
RKI GD-70D Intelligent Gas Detector Transmitter
Price: See Options to View Pricing
RKI GD-70D Intelligent Gas Detector Transmitter
The new Model RKI GD-70D Intelligent Gas Detector smart gas detection transmitter series sets a new standard for performance, flexibility, and versatility. The GD-70D sample-draw transmitter offers an array of sensor technologies unmatched in the industry