/* fix for search bar */ /* fix for search bar end */

Your cart is empty.





<< Previous in Transmitters Next in Transmitters >>

Price: From $2,699.00 to $2,899.00
Manufacturer: LEVEL PRO

Choose Your Model



  • All Plastic Design
  • Small Dead Band 80mm 3.2″
  • PP, PTFE Antenna (Horn)
  • Low Profile
  • Simple Programming
  • Suitable for Dense Foam
  • Corrosion Resistant
  • IP67 Housing
  • Epoxy Coated
  • 4-20mA Loop Powered

The ProScan Series transmitter measures the liquid level inside the tank or sump by using an all plastic (PP or PTFE) antenna or horn that sends and receives low energy radar pulses. The sensor is mounted to the top of the tank and the pulsed signal is reflected off the liquid surface, the echo (returned signal) is then picked up or received by the transmitters antenna. The time it takes is compared to known laws of physics (speed of light), once this is done the distance can be determined, and very accurately measured.

Distance =(Speed of Light x Time Delay)/2

The ProScan Series does not contact the process liquid and therefore is an excellent choice for applications that may be corrosive, coating, dirty, or crystallizing. The are temperature compensated over the entire range (-40-260°F) and can be used on to measure liquid under pressure or vacuum. The ProScan Series is both reliable and accurate; there is no requirement for re-calibration, and virtually zero maintenance as there are no moving parts. The ProScan Series utilizes a special microprocessor technology and mapping software that allows it to be used where other non-contact level.

   ProScan Series Datasheet