|
BetaGauge PIR-PRO Reference Class Digital Test Gauge
|
|
Price: From $1,025.00 to $2,325.00
Delivery within 1 week to 21 days. If needed sooner, please contact us.
Choose Your Model
| |
| |
| |
| |
|
BetaGauge PIR-PRO Reference Class Digital Test Gauge
with RS232 Port and Internal Temperature Sensor
Features
- Manufactured by Martel Electronics
- Ranges to 10,000 psig
- Accuracy: ±0.04% F. S.
- Temperature compensated over 0 to 50°C
- Displays in 18 standard or fully custom engineering units
- Large, back-lit, 5-1/2 digit display with 0.65" digits and 20 segment bar graph
- CSA intrinsically safe, Class 1, Div. 2 Groups A, B, C & D; ATEX approved; CE approved
- Available with optional 24V external power input
- Optional pressure port location on back of gauge for panel mounting
The Martel BetaGauge PIR Pro is a reference-class pressure gauge that takes the concept of a simple analog test
gauge and combines it with the accuracy and features of digital technology. The PIR Pro provides exceptional
performance with ±0.04% of reading accuracy, especially when operated below 50% of its range.
The BetaGauge PIR PRO is available in pressure ranges up to 10,000 psig. Additionally, a compound ranges is
also available. Readings may be displayed in any one of 18 standard engineering units or in 1 custom user-defined
unit to eliminate tedious conversion calculations. Rugged zinc-aluminum alloy high pressure cast housing provides
environmental integrity of the gauge in a small, light package.
The PIR Pro includes a 5-1/2 digit digital display. The 0.65" numerals and companion bar graph provide an easy
to read display, even from a distance. A number of features provide additional ease of use. The reading sample
rate can be user adjusted to match the type of measurement required. Other features include MIN/MAX function,
Auto Power Off and backlight control. In addition to a ZERO function that compensates for sensor drift, large
residual system pressures can be nulled using the TARE adjustment.
Setting up the Martel BetaGauge PIR Pro is fast and straightforward, through a menu-driven display, with minimal
text and intuitive functions. A password-protected field calibration may be initiated through the keypad and an
RS232 port allows pressure reading data to be extracted directly from the gauge for off-line analysis (requires
Martel RS232 cable). Damping can be set to integrate readings to accommodate pulsating sources, such as plant air.
An optional external 24 VDC power input is available for applications where the BetaGauge PIR Pro will be permanently
incorporated into a process line. A protective rubber boot is standard to help protect the BetaGauge PI Pro from
damage when dropped.
The BetaGauge PIR Pro is available in a self-contained calibration kit which includes a test pump (with MECP500
pneumatic test pump for ranges 500 psi and below or a MECP10K hydraulic test pump for ranges above 500 psi), test
hose, fittings, rubber boot and carrying case.
Specifications (0 °C to +50 °C, unless otherwise noted)
Input Ranges
30 PSI Compound (C/V), 30 psi, 100 psi, 500 psi, 1000 psi, 3000 psi, 5000 psi, 10,000 psi
Accuracy
±0.04% of reading, ±0.01% FS
Vacuum accuracy of the compound range is 0.1% of the 30 psi full scale. Vacuum measurement not calibrated for other ranges.
*Compound Range is Non-Isolated and compatible with Dry Clean Air and Gas Only*
Temperature Compensation
0 °C to +50 °C (32 °F to +122 °F) to rated accuracy
Standard Engineering Units
PSI, Bar, Kg/cm, inH2O (4 °C, 20 °C or 60 °F), ft H2O (4 °C, 20 °C or 60 °F), mmH2O, cmH2O (4 °C and 20 °C), mH2O (4 °C and 20 °C), Kpa, mBAR, inHg, mmHg, TORR
Media Compatibility
Liquids and gases compatible with 316 stainless steel; 30 C/V range non-corrosive gases and liquids
Environmental
Operating Temperature:
-10 °C to +55 °C
Storage:
-20 °C to +70 °C (-4 °F to +158 °F)
Mechanical
Dimensions:
4.375" x 5.0" x 1.50"
Input Port:
1/4" male NPT
Display
5 Digits, 0.65" (16.53 mm) height
Bar Graph – 0 to 100% in 20 segments
Power
Battery:
Three (3), size AA alkaline batteries
Battery Life:
1,500 hours without backlight;
2,000 hours at slow sample rate;
battery life can be displayed on bar graph to indicate the amount of time left
Low Battery Indicator:
displayed icon near the end of battery life
Includes: manual, batteries
Don't have Reader?
|
|
The BetaLOG™ software is designed to log pressure data from the BetaGauge PI and BetaGauge PIR Pressure Gauges. BetaLOG™ configures the gauges to operate in the field (Demand Ad-hoc) or in Computer Mode (Download). The gauges store up to 9,520 measurement
| | |
|
|