|
Hart Scientific Accessories
Case, Probe Carrying. Protect your PRT's! Keep them in a padded case between uses.
|
2” Aperture, for 4180 or 4181 infra-red calibrator.
|
Field-durable, lab-accurate PRTs have been replaced by the 5615, which comes with a NVLAP accredited calibration.
|
5627A probes have a temperature range up to 420 °C and an accuracy as good as ± 0.025 °C. They come in three different lengths.
|
This case fits the 1523/1524 Reference Thermometers. PROTECT YOUR PRT's!!!! Use a padded case to avoid shock and accidental breakage.
|
Case for models 4180-81 infra-red calibrators. Rugged, padded carrying or transport case.
|
Case, 6102 Micro-Bath Carrying Case. Padded, with compartments suitable for the model 6102 bath
|
Case, 7102 Micro-Bath Carrying Case. Padded, with compartments suitable for the model 7102 bath.
|
Case, 7103 Micro-Bath Carrying Case. Padded, with compartments suitable for the model 7103 bath
|
Lid, Metal Blank, for model 6102 micro-bath.
|
Lid, Plastic Blank, for model 7102 micro-bath.
|
Tank Extender, 6102/7102 Micro-Bath. Allows the user to insert probes up to 9" long. Screws into place, easily added or removed.
|
Lid, Plastic Blank, for 7103 Micro-Bath
|
Smart Connector, PRT (Gray Cap)
|
Dry Well 9102S Insert Sleeve. Blank.
|
Insert, Blank no holes, for dryblock # 9011.
3103-1 Insert, Blank (Cold Side) 3103-2 Insert A, Miscellaneous (Cold Side) 3103-3 Insert B, Comparison (Cold Side) 3103-4 Insert C, Six 1/4 in Wells (Cold Side) 3103-6 Insert D,...
|
Insert, "A" w/ misc holes, for dryblock # 9011.
...3103-2 Insert A, Miscellaneous (Cold Side) 3103-3 Insert B, Comparison (Cold Side) 3103-4 Insert C, Six 1/4 in Wells (Cold Side) 3103-6 Insert D, Comparison - Metric (Cold Side) 2125-C...
|
Insert, "B" comparison, for dryblock # 9011.
3103-3 Insert B, Comparison (Cold Side) 3103-4 Insert C, Six 1/4 in Wells (Cold Side) 3103-6 Insert D, Comparison - Metric (Cold Side) 2125-C
|
Insert, "C" w/ 6 0.25" holes, for dryblock # 9011
3103-4 Insert C, Six 1/4 in Wells (Cold Side) 3103-6 Insert D, Comparison - Metric (Cold Side)
|
Insert, Blank, hot side, for model 9011, high-accuracy, dual dryblock.
Suitable for custom drilling by customer or qualified machine shop.
|
Insert, Miscellaneous Holes (A) for Hart dual dryblock model 9011.
Hot side insert with the following drillings: 1/16", 1/8", 3/16", 1/4", 3/8",
1/2".
|
Insert, Comparison Holes (B), Hot side. Hart model 9011 high accuracy dual dryblock accessory. Drilled as follows: Two 1/4" holes, two 3/16" holes, one 1/8" hole, one 3/8" hole.
|
Insert C, hot side, Hart Scientific model 9011 high accuracy dual drywell accessory. Drilled as follows: Eight 1/4" Holes
|
Insert, 9140 no holes - Blank insert for Hart Scientific model 9140 drywell.
|
Insert for Hart Scientific model 9140 drywell. Insert "A" with misc holes, drilled as follows: 1/16", 1/8", 3/16", 1/4", 3/8", 1/2".
|
Insert "B" for Hart Scientific model 9140 drywell. Comparison type, drilled as follows: Two 3/16" holes, two 1/4" holes, two 3/8" holes.
|
Insert "C" for Hart Scientific model 9140 drywell. Features six 1/4" holes.
|
Insert , blank, for Hart Scientific model 9141drywell. Al-Bronze, no holes. blank
|
Insert "A" for Hart Scientific model 9141 drywell. Aluminum-bronze with misc holes drilled as follows: 1/16", 1/8", 3/16", 1/4", 3/8", 1/2".
|
Insert "B" for Hart Scientific model 9141drywell. Aluminum bronze, with comparison holes drilled as follows: Two 3/16", two 1/4", two 3/8".
|
|
|