|
Field Calibration Kits
Price: From $1,300.00 to $3,397.00
Finally a solution to generating very low fractional inches of water column pressure, positive or negative! Combine with an accurate low pressure gauge standard and you have a viable, low cost alternative to costly comparison standards.
|
Price: From $68.00 to $1,697.00
Compact, rugged and easy to use, this pump offers users an affordable pressure source to 600 psig and vacuum to -28"Hg. Combine with an accurate digital pressure/vacuum gauge and you have a low cost, yet highly accurate field standard.
|
Price: From $2,725.00 to $3,195.00
Source / read 4-20mA, read external RTD, 24 Vdc transmitter excitation, 250 ohm Hart resistor, 8 AA battery power or charger pack, built-in electric pump to generate pressure and vacuum. Internal sensor ranges available in 30 psig, 150 psig and 300 psig.
|
Maintain calibration for 50 instruments! Rugged, multi-function, documenting calibrator, with over 28 pressure modules to choose from; sources and reads RTD's, TC's, DCV, DC current, and more! The best value in it's category!
|
The Master Cal 990 features everything you'll ever need in a portable, Hart communicator, multi-parameter, documenting calibrator. Low cost external pressure sensors make this a terrific buy!
|
The most economical, dual display, multifunction calibrator available!
Built in 24V supply can drive 4-20mA loops up to 1000 Ohms. Pressure module comm port compatible with Fluke 700 series modules or Beta modules. Direct entry of RTD co-efficients.
|
Price: From $365.00 to $465.00
The pneumatic hand pump is designed for a simple to use pressure and vacuum source for calibrating process control instrumentation.
Vacuum to 100 psi.
|
Price: From $352.20 to $357.30
Hydraulic Hand Pumps with Gauge Connections
Mfr# HPGV 3000psi
XHGV - 5000psi
|
Price: From $3,498.00 to $3,545.75
Pressure Calibration Nitrogen Sources
Mfr #NPAK series
|
Price: From $1,316.00 to $1,443.50
Mfr # QTVC -3000psi Pressure Calibration Volume Controllers. "Wally Boxes" can't exceed 100 psig in the field. This is a product that can produce a dead end pressure (with no added source) to 30 psi, or control to 3000 psi of nitrogen. Good for vac too!
|
Price: From $276.00 to $290.00
Mfr # DVOV series. Cylindrical vacuum hand pumps with precise vernier control.
|
Portable Pneumatic Pressure Source. Self-contained, rechargeable, N2 bottle with 15 C.Ft. of volume. Sources up to 3000 psig with no effort! Precision INCREASE valve, DECREASE valve and fine adjust vernier included. VERY rugged and convenient!
|
# QTHA-KIT4. ASK for this for your birthday!!!! This kit has all the adaptors you need for field calibration! And two hoses too! All tidy and neat in a rugged case. Stop spending hours rummaging in that "junk fitting drawer". (And we KNOW you do that!)
|
Price: From $995.00 to $1,095.00
High accuracy digital pressure gauge. 0.01% of reading accuracy
Avalible Ranges: 2000psi to 10,000psi. NIST traceable cert.
Intrinsically Safe. Shock Resistant, water resistant, Datalogging capable.
|
Price: From $895.00 to $1,540.00
High accuracy digital pressure gauge. 0.01% of reading accuracy
Avalible Ranges: 15psi to 10,000psi. NIST traceable cert.
Intrinsically Safe. Shock Resistant, water resistant, Datalogging capable.
|
Convert your old "Wally Box!" Drop in conversion gauge allows you to upgrade your old analog standby from years ago! 0.1% of READING accuracy. NIST traceable, with cert.
|
Mfr #NV-4AA ;Typically 0.025% of reading accuracy; ATEX/IECEx Intrinsically safe; Log and display 500,000 points at up to 10 readings/sec on up to two modules simultaneously; IP67 (1 meter immersion for 30 minutes). NIST traceable with cert.
|
High Pressure Calibration Standard w/ handles. Standard ranges 10,000/5000/2000psi and 5000/2500/1000psi. +-0.05% F.S. accuracy.
|
High Pressure Calibration Standard w/ handles. Standard ranges 10,000/5000/2000psi and 5000/2500/1000psi. +-0.05% F.S. accuracy.
| | |
|
|