Crystal MultiCal Pressure Module ~ NASA's DMM pressure solution
The MultiCal pressure module is chosen by NASA for the Space Shuttle and International Space Station. These modules convert your meter into an accurate pressure measuring system. The analog signal is clean, accurate and fast, so you can even use MultiCals with oscilloscopes to measure dynamic pressure.
-
Converts a meter into high accuracy pressure measuring system
-
1k Hz pressure response
-
Connects directly to oscilloscopes
-
Lightweight
-
Runs on single 9V battery
-
Millivolt output
-
Comes with a dual banana jack cable and holster case
Model # H20/PSI ~ selectable ranges
0 to 830"H20:+-(0.05% of reading + 0.1"H20)
0 to 30 PSI: +-(0.05% of reading + 0.01PSI)
30 to 50 PSI: +-(0.25% of reading)
0 to -14.7 PSI: +-(0.5% of reading + 0.02PSI)
Max Pressure: 100PSI
Model # Hg/PSI ~ selectable ranges
0 to 30"Hg: +-(0.1% of reading + 0.01"Hg)
0 to -30"Hg: +-(0.1% of reading + 0.01"Hg)
0 to 500PSI: +- (0.1% of reading + 0.02PSI)
0 to -14.7PSI: +-(0.25% of reading)
Max Pressure: 1000PSI
Model # HgA/mmHgA ~ selectable ranges
0 to 760mmHgA: +-(0.08% of reading + 0.2mmHg)
0 to 30"HgA: +-(0.08% of reading + 0.01"Hg)
30 to 60"HgA: +-(0.25% of reading)
Max Pressure: 100PSIA
Model " mmHgA/PSIA ~ selectable ranges
0 to 760 mmHgA: +-(0.08% of reading + 0.2mmHg)
0 to 30 PSIA: +-(0.08% of reading + 0.01 PSI)
Max Pressure: 100 PSIA
Temperature: Operating & Compensated: -10C to 50C (14F to 122F); Storage: -40C to 75C (-40F to 167F)
Connections: Pressure connection: 2 x 1/8" NPT(female); Banana Jacks: 4mm plugs on 19mm (0.75") centers
Certifications: CE
Media Compatibilty: Liquids and gases compatible with PTFE (Polytetrafluoroethylene) penetrated, hard anodized, aluminum (transducer housing), 316 stainless steel, buna-n O-ring
Power: Battery: One standard 9V batter; Battery Life: 400 hours typical (alkaline battery)
Sensor: Our sensor is all welded stainless steel. It does not use o-rings, thread tape, sealant, or epoxy. As a result, the MultiCal can be safely used with any liquid or gas compatible with 316 stainless steel.
Enclosure: Dimensions: 50 mmW x 117 mmL