Pelican Attached/Computer Lid Insert
for Case #1495CC1
|
Price: From $46.00 to $54.00
Interior Dimensions: 8.18" x 5.68" x 3.62"
Accessories # 1151, 1153
|
Price: From $38.00 to $46.00
Interior Dimensions: 7.25" x 4.75" x 3.06"
Accessories # 1120PF, 1121, 1123
|
|
Pelican Replacement Foam Set for Case #1090 & 1090CC
|
Pelican Shoulder Strap for Case #1470 & 1490
|
|
|
Replacement O-Ring for various Cases
|
Pelican Pick N Pluck Foam
|
Suitable for cases #:
See Complete List in DETAILS tab!
|
Pelican 7 piece Replacement Foam Set.
Suitable for cases #:
0341 for Case #0340 (+ $156.95)
0351 for Case #0350 (+ $172.95)
0371 for Case #0370 (+ $219.95)
0501 for Case #0500 (+ $399.95)
|
Pelican 6 piece Replacement Foam Set.
Suitable for cases #:
1441 for Case #1440 (+ $51.95)
1621 for Case #1620 (+ $118.95)
1781 for Case #1780T/1780W (+ $271.95)
1741 for Case #1740 (+ $197.95)
|
Pelican 5 piece Replacement Foam Set. Suitable for cases #:
1431 for Case #1430 (+ $41.50)
1611 for Case #1610 (+ $116.95)
1631 for Case #1630 (+ $158.95)
1641 for Case #1640 (+ $153.95)
1661 for Case #1660 (+ $190.95)
1691 for Case #1690 (+ $2
|
Pelican 4 piece Replacement Foam Set. Suitable for the following cases:
1301 for Case #1300 (+ $26.50)
1511 for Case #1510 (+ $54.95)
1551 for Case #1550 (+ $80.95)
1561 for Case #1560 (+ $82.95)
1601 for Case #1600 (+ $109.95)
|
Pelicans 3 Piece Replacement Foam
|
Pelican Document Container Accessorie for Case #0500 & 1630
Part #1630DC
|
Price: From $94.00 to $189.00
Install between a pressure gauge and the process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system.
|
Replacement Ball and Tip for the Can Testing Vacuum Gauges.
Replaceable tip assembly for applications where clogging of the needle is a problem, such as in canning meats, pet foods, etc
|
Price: From $1,300.00 to $2,240.00
The SDM-2012 is a versatile maintenance tool that automates the service of a GX-2012 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing. Use for GX-2012 and Gas Tracer.
|
Price: From $1,995.00 to $3,085.00
The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing.
|
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.
|
For use with 700 series pressure modules or test gauges. Can be directly connected to the reference port consolidating two separate pieces when performing pressure calibration and testing. Can also be used with 717 pressure calibrators.
|
The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT.
|
Always Seals, Always Safe, Leak-Free up to 10000 PSI/700 bar/70 MPa, Purpose-designed for testing & calibration, Self-venting weep hole assures a safe disconnection from a pressurized system.
|
Hard carrying case with custom-cut foam liner
|
The 753, 754 and 743,744 work with the Fluke DPC/TRACK2™ software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others.
|
Printer for Kanomax Handheld Particle Counters.
|
Price: From $308.00 to $348.00
Interior Dimensions: 35.75" x 13.50" x 5.25"
Accessorie #s 1701, 1703
|
Tripod for Kanomax Particle Counter 3886 & 3887
|