/* fix for search bar */ /* fix for search bar end */

Your cart is empty.



   
 

   

 

PIECAL 820-Elite Multifunction Diagnostic Process Calibrator

<< Previous in Calibrators Next in Calibrators >>

Price: $2,574.00
Item Is In Stock
Item Number: PIECAL 820-Elite
Manufacturer: PIECAL (Practical Instrument Electronics inc.)

Options

Optional Accessories
Multifunction Diagnostic Process Calibrator
PIE 820-ELITE - Updated for 2015

•  Lighten up your toolbox
Compact calibrator replaces toolbox of single function devices
Milliamp • Voltage • Frequency • pH •Resistance
Thermocouples • RTDs • Check Continuity
 • Pressure
•  Technician friendly operation
Intuitive EZ-DIAL Double Click Menu makes it easier to setup than
other multifunction calibrators. Similar to the menus as the single
function PIECAL Evolution Calibrators. Icons on the display show where to plug in the test leads.
• 

Use it as a milliamp and voltage calibrator
Source 0.000 to 24.000 mA, 0.00 to 10.250 V dc, -20.00 to 99.999 mV and -500.00 to 999.99 mV
Read to 24.000 mA, 60.00 V dc ±99.999 mV and and ±999.99 mV
Simulate 2-Wire Transmitters
Power up transmitters & loops with the built-in 24 V power supply.
Simplify HART hookups with built-in 250 Ohm resistor

• 

Troubleshoot loop problems
Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058)

•  Calibrate directly in temperature (°C & °F)
The PIECAL 820 works with the instruments you use.
Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P
(Platinel II)
Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm
•  Checkout flow and vibration systems
Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.00
Hz, 9999.9 Hz, 9.9999 kHz & to 20.000 kHz
•  Troubleshoot loop & wiring problems
'Beep' out connections with the built-in continuity checker
• 

Simulate pH probes into transmitters & analyzers
Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV

• 

Measure pressure with optional pressure modules
32 modules for gauge, differential, compound and absolute pressure

•  Easy to read
Turn on the backlight & easily see the display in dark areas of the plant
•  Quickly set any three outputs plus automatic stepping & ramping
Easily set any value quickly with the adjustable "DIAL" plus store any three output settings for instant recall with the EZ-CHECK™ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds.
•  Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures
Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
 
Advantages of the PIE 820-ELITE over similar multifunction calibrators
PIE 422
•  Higher Accuracy - Cal Lab Accurate
Accurate to 0.006 mA, Pt 100 Ohm RTD to 0.2°C/0.4°F, Type K to 0.3°C/0.6°F, pH to 0.003 pH
•  Loop Diagnostics - Unique to PIE
Only multifunction calibrator that can power up a loop and tell you that there is moisture, corrosion or a ground fault causing current to leak to ground.
•  Simulates a pH probe
Calibrate pH tranmitters & analyzers before attaching probe to verify that each is working correctly.
•  More Thermocouple & RTD ranges with 0.1° resolution and better accuracy
Compatible with smart transmitters, multichannel recorders, PLCs and DCSs - GUARANTEED!
•  Smaller & lighter
Pocket sized and easier to carry
•  LED for optical pickups
LED flashes green in synch with frequency output. Illuminates red for overload conditions.
•  Hands free carrying case (Pictured)
Deluxe carrying case is designed to hang around your neck freeing up both hands


Don't have Reader?


View the Datasheet. View the Leakage Detection Overview. View the Operating Instructions. Troubleshooting