Your cart is empty.




Fluke/Hart 9100S/9102S - Dry-Well, Handheld Hi-Temp.

<< Previous in Calibrators Next in Calibrators >>

Price: From $2,338.00 to $3,847.00
Mfr. Part Number: 9100S/9102S

Choose Your Model

Fluke/Hart 9100S/9102S - Dry-Well, Handheld Hi-Temp.

* Smallest dry-wells in the world
* Ranges from –10°C to 375°C
* Accuracy to ±0.25°C, stability of ±0.05°C at 0°C
* RS-232 interface with Hart software (Model 9930) – NEW!

9100S Dry-Well

Since we introduced the world’s first truly hand held dry-well, many have tried to duplicate it—in vain. Despite its small size (2¼ inches high and 5 inches wide) and light weight, the 9100S outperforms every dry-well in its class in the world.

It’s simple and convenient, too. Anyone can learn to use one in less than 15 minutes. It has a range to 375°C (707°F) and is perfect for checking RTDs, thermocouples, and small bimetal thermometers in the field.

Plug it in, switch it on, set the temperature with the front-panel buttons, and insert your probe into the properly sized well. Compare the reading of your device to the display temperature or to an external reference, and the difference is the error in your device. With a proprietary Hart Scientific temperature controller, the 9100S  has a display resolution of 0.1 degrees, an accuracy of ±0.5°C, a stability of ±0.1°C, and a stabilization time of just five minutes.

Ordering Information - 9100S
9100S-A - HDRC Handheld Dry-Well A
9100S-B  - HDRC Handheld Dry-Well B
9100S-C  - HDRC Handheld Dry-Well C 

9102S Dry-Well
For work in the temperature range of –10°C to 122°C, Hart’s Model 9102S  dry-well is another first in the industry, featuring stability to ±0.05°C.

This dry-well is only four inches high and six inches wide, achieves temperatures as low as –10°C, includes a NIST-traceable calibration, and is stable to ±0.05°C. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient.

The 9102S has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. The 9102S also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable.


9102S 9100S
Range –10°C to 122°C (14°F to 252°F) at 23°C ambient 35°C to 375°C (95°F to 707°F)
Accuracy ±0.25°C ±0.25°C at 50°C; ±0.25°C at 100°C;
±0.5°C at 375°C
Stability ±0.05°C at 0°C
±0.1°C at 122°C
±0.07C at 50°C; ±0.1°C at 100°C;
±0.3°C at 375°C
Well-to-Well Uniformity ±0.2°C with sensors of similar size at equal depths within wells
Heating Times ambient to 100°C: 10 minutes 35° to 375°C: 9.5 minutes
Stabilization 7 minutes 5 minutes
Cooling Times ambient to 0°C: 10 minutes 375°C to 100°C: 14 minutes
Well Depth 4 inches (102 mm) 4 inches (102 mm); 1/16" (1.6 mm) hole is 3.5" (89 mm) deep
Removable Inserts Available in sizes from 1/16" (1.6 mm) to 7/16" (11.1 mm)
[1/4" (6.4 mm) and 3/16" (4.8 mm) included]
Computer Interface RS-232 included with free Interface-it software
Power 94-234 VAC (±10%), 50/60 Hz, 60 W; or 12 VDC 115 VAC (±10%), 1.5 A or 230 VAC (±10%), 0.8 A, specify, 50/60 Hz, 175 W
Size 3.9" H x 5.5" W x 6.9" D (99 x 140 x 175 mm) 2.25" H x 4.9" W x 5.9" D (57 x 125 x 150 mm)
Weight 4 lb. (1.8 kg) 2 lb. 3 oz. (1 kg)
NIST-Traceable Calibration Data at –10°C, 0°C, 25°C, 75°C, 55°C, 100°C, and 122°C Data at 50°C, 100°C, 150°C, 200°C, 250°C, 300°C, and 375°C

View the
Data/Spec Sheet
Don't have Reader?
View the 9100S
View the 9102S

Related Products

Fluke/Hart 9308 - Case, Hard Carrying
Price: $253.00
Fluke/Hart 9308 - Case, Hard Carrying
Case, Hard Carrying
Fluke/Hart 9300 - Case, 9100 Rugged Carrying
Price: $180.00
Fluke/Hart 9300 - Case, 9100 Rugged Carrying
Case, 9100 Rugged Carrying
Fluke/Hart 3102 (0-8) - Dry Well 9102S Insert Sleeves
Price: From $190.00 to $216.00
Fluke/Hart 3102 (0-8) - Dry Well 9102S Insert Sleeves
Dry Well 9102S Insert Sleeve. Blank.